Grease Trap requires regular cleaning and maintenance to avoid foul odors and blockage. They won’t work smoothly and efficiently if you don’t maintain and clean greese trap. Because this way, the grease will enter the pipelines, which can lead to harmful consequences and damage to your property.
Grease traps keep your kitchen clean and smelling great. This is one of the main problems most hotels and restaurants face, especially if they forget to clean regularly. But, if you tend them regularly, it helps your business run smoothly.
You can clean this trap yourself, but a professional plumbing service will ensure that you don’t get any smelly or expensive backups when you don’t catch the FOG before they enter the main line. Thus, you can look for the companies that provide such services.
JVC Wet Waste LTD is one of the best companies that offer this service with positive results. We ensure to clean your grease trap deeply, so you don’t face any problems while working in the kitchen. But, if you want to do it yourself, this piece of article will help you with this.
Steps for Cleaning the Grease Trap
The following are the essential steps for grease trap cleaning;
Find the Right Location of the Grease Trap
Manufacturers install the grease trap in the kitchen where the food is prepared, indoors or outdoors. You can quickly identify the outdoor pitfalls by the septic tank design. But, to look at it indoors, you should look in the restaurant’s basement or under the kitchen sink.
When you identify it, determine the size of the trap. Observing the tank’s capacity will give you a better idea of whether you can clean it yourself or need to hire professionals. You need to call a professional if your grease trap is between 500 to 2500 gallons. Otherwise, you can clean the smaller ones yourself.
Use Water to Remove FOG
It will help if you use a lot of water so that the fats, oil, and grease float on the top. You must wait for ten minutes until the dishwasher releases hot water and cools. Now, carefully remove the trap cover because the gasket can be damaged if you remove the lid without precaution.
You will see a thick layer of the grease sludge; use a scoop to remove the floating FOGs. Once you lift the tank, water and leftover food sloid will remain. The next step is to scrape off the trap’s lid, baffles, and sides. Using a shop vac, suction out the grease particles that remain in there.
Refresh the grease trap and free the tank from the foul odors. Flush out the soap after using clean water. And, you will leave with a clean grease trap. It will make a smooth water flow, but if you think there is a blockage, you should contact a company to remove that obstruction.
Properly Dispose of the FOGs
The grease trap needs to be clean every four to six weeks. You can use the bacteria additives to lessen the frequency of the cleaning. Moreover, be careful while using the hot water flushes or other products because they liquefy the FOGs by sending them down the drain and entering the main sewer line.
The cost of cleaning the grease trap varies depending on the size of the grease trap. So, when your grease trap is expensive, and you want to hire professionals to perform such an essential function for you, you can look to the experts of JVC Wet Waste LTD, and we will surprise you with our services.
A Quick Wrap Up!
To conclude, we can say that homeowners may not have the time to clean the grease trap themselves and may not have the right equipment for it. But, this doesn’t mean you can ignore this. The best solution is to hire JVC Wet Waste LTD and leave the stress of cleaning on us. We will make sure to deeply clean your grease trap and make it free from odor so that you don’t have to face any problems again shortly. The best thing is that you can talk and discuss any problem with our experts; they will listen and provide long-lasting solutions.